Timing belt Movendis P-1576-D/8M-180

MOVENDIS P-1576-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1576-D/8M-180 and any equivalents.

This Movendis belt is a double-sided timing belt in the Curvilinear series, identified by part number P-1576-D/8M-180 and a 1576 mm length. Double-sided timing belts are used where a single drive must transmit motion from both faces of the belt, such as reversing or multi-shaft arrangements on industrial machinery. Confirm fit by matching the part number and the 1576 mm length to the belt you are replacing.

When a drive runs two shafts in opposite directions or needs power taken from both sides of the belt, a double-sided timing belt is often the answer. The teeth on both faces engage matching pulleys, so the belt can drive from either side without turning the belt inside out. This Movendis belt carries the 8M profile and a 1576 mm length, which are the two dimensions to check first.

To confirm fit, read the marking on the back of the old belt and compare it with P-1576-D/8M-180. If the marking is worn, measure the length and check the tooth profile against the pulleys. A double-sided belt must match the pulley groove on both faces, so note the profile and the length before ordering.

Send the part number, the belt marking, or a photo of the old belt by WhatsApp or email. Our team can confirm the right belt or suggest an equivalent, and we reply promptly.