Timing belt Movendis P-156-3M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-156-3M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-156-3M-450 and any equivalents.
The Movendis P-156-3M-450 is a curvilinear H-type timing belt with an HTD 3M profile and a 156 mm length. It is used in low-power synchronous drives where the belt teeth mesh with matching pulleys to maintain position and timing. Confirm fit by checking the profile and length against your drive.
This belt suits compact equipment such as small conveyors, office machines, and light-duty positioning drives. The HTD 3M profile and 3 mm pitch indicate a metric synchronous drive, so the pulleys must have a matching HTD 3M groove. Measure the old belt or read its back marking to verify the 156 mm length before ordering.
To request a quote, send the part number P-156-3M-450 by WhatsApp or email. If you are unsure whether this is the correct belt, include the profile and length from your old belt, or a photo of the back marking. The team can confirm the belt or suggest an equivalent.
Inspect the drive for worn pulley teeth, misalignment, and correct tension. Replace the belt if you see cracked teeth, exposed cords, or glazing. When a drive uses multiple belts, replace them as a set to keep loads even.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 156mm
Frequently asked questions
- What does the marking on the back of the belt tell me?
- The back marking typically shows the profile and length. For this belt, look for HTD 3M and 156 mm to confirm it matches your drive.
- Can I use this belt on any 3 mm pitch pulley?
- No. The pulley must have an HTD 3M profile. A different 3 mm pitch profile may not mesh correctly with the belt teeth.
- What should I send to request a quote?
- Send the part number P-156-3M-450. If you are replacing an existing belt, also include the profile and length from the old belt or a clear photo of its back marking.