Timing belt Movendis P-1520-D/8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1520-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1520-D/8M-180 and any equivalents.
The Movendis P-1520-D/8M-180 is a double-sided timing belt from the Curvilinear Double-Sided Timing Belts series, with a length of 1520 mm. Because both faces carry teeth, it drives from either side, which makes the condition of the drive worth checking before the belt goes on.
Start with the sheaves. Look for worn or hooked tooth flanks, debris packed into the grooves, and any runout or misalignment between the two shafts. On a double-sided belt, both sets of grooves matter, so inspect every pulley the belt wraps, including idlers and backside tensioners. A sheave that has worn out of profile will shorten the life of a new belt.
Confirm the belt itself before ordering. Read the marking on the back of the old belt and match it to the part number P-1520-D/8M-180, and check the profile and the 1520 mm length against the drive layout. If the old belt is worn or unreadable, send us the part number and the details of the drive so we can confirm the right belt.
Once the drive is clean and aligned, fit the belt without forcing it over the flanges, then set tension to the drive manufacturer's specification and recheck it after the first run-in period. Keep the old belt as a reference for the next replacement.
Dimensions
- Length
- 1520mm
Frequently asked questions
- What is the length of the Movendis P-1520-D/8M-180?
- The belt has a length of 1520 mm, as listed for this part number.
- What should I check before fitting this belt?
- Inspect the sheaves for worn tooth flanks, debris in the grooves, runout and misalignment, and check the condition of any idlers or tensioners the belt contacts. Both toothed faces of a double-sided belt run in grooves, so every pulley in the drive should be checked.
- How do I request a quote for this belt?
- Send the part number P-1520-D/8M-180 by WhatsApp or email. If you are unsure of the number, include the marking from the old belt and the drive details so the belt can be confirmed.