Timing belt Movendis P-1504-D/8M-180

MOVENDIS P-1504-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1504-D/8M-180 and any equivalents.

This Movendis belt is a double-sided timing belt in the Curvilinear series, identified by the part number P-1504-D/8M-180. The two numbers that matter when you read it are the profile and the length: 8M curvilinear teeth and 1504 mm. That is what you match against the belt on the drive.

The 8M profile is a metric curvilinear tooth form, and the 1504 mm length is the datum you compare with the old belt. On a double-sided timing belt, teeth are on both faces, so the belt drives from either side. Confirm both the profile and the length before you request a quote, because a belt that is close on one dimension and wrong on the other will not run correctly.

The cleanest way to verify a replacement is to read the marking on the back of the belt you are removing and compare it with P-1504-D/8M-180. If the marking is worn or unreadable, measure the length and identify the tooth profile from the pulleys. Send the part number, the profile and the length, and our team will confirm the belt or suggest an equivalent.

When you replace a double-sided timing belt, inspect both pulley faces and the idlers for wear, and check that the belt tracks correctly on both sides. If the drive uses more than one belt, replace them as a set so the load stays even. Send the part number by WhatsApp or email and we will reply promptly.