Timing belt Movendis P-1480-D/S8M-180

MOVENDIS P-1480-D/S8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1480-D/S8M-180 and any equivalents.

The Movendis P-1480-D/S8M-180 is a curvilinear double-sided timing belt from the Curvilinear Double-Sided Timing Belts series, with a 1480 mm length. It drives from both faces, so it suits layouts where two shafts run off opposite sides of the same belt. Before you fit one, inspect the drive.

Check both sides of the belt path, not just the toothed face you can see. Look at every sheave for worn tooth flanks, hooked or rolled-over teeth, and debris packed into the grooves. A sheave that has lost its profile will wear a new curvilinear double-sided timing belt quickly, so correct or replace it before installation.

Confirm alignment between the two driven sheaves and the drive sheave. Misalignment pulls the belt to one edge and loads the ribs unevenly on a double-sided design. Check that each sheave is secure on its shaft, that keyways and tapers are sound, and that no bearing has play that would let a sheave move under load.

Set tension to the drive manufacturer's specification for this belt construction, then recheck it after the first run-in period. Keep the drive clean and free of oil or grit. If you are replacing a belt on a drive that has run a long time, inspect the whole system rather than only the belt.

Send the part number P-1480-D/S8M-180 by WhatsApp or email and our team will confirm the belt or suggest an equivalent for your drive.