Timing belt Movendis P-1408-S8M-540
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear S-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1408-S8M-540 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1408-S8M-540 and any equivalents.
The Movendis P-1408-S8M-540 is a curvilinear S-Type timing belt with an STD profile and a length of 1408 mm. This page gives maintenance, engineering and purchasing teams the exact profile and length so they can match it to the drive before requesting a quote.
The profile and length are the two facts that decide whether a timing belt fits. The STD profile defines the tooth shape, and 1408 mm is the datum length. If your old belt is marked P-1408-S8M-540, or the drive documentation calls for an STD profile belt at 1408 mm, this is the number to quote.
Timing belts are often replaced as part of a planned drive service. Before ordering, check the pulley teeth for wear, confirm the belt is seated correctly and inspect any tensioner or idler in the system. A belt that has run hot or lost tension can damage the pulleys, so a quick inspection at replacement time is worth the effort.
To request a quote, send the part number P-1408-S8M-540 by WhatsApp or email. If you are unsure about the profile or length, include a photo of the back of the old belt and the drive arrangement. The team can confirm the belt or suggest an equivalent.
Dimensions
- Profile
- STD
- Length
- 1408mm
Frequently asked questions
- What do the profile and length mean on the P-1408-S8M-540?
- The profile is STD, which identifies the tooth shape, and the length is 1408 mm. Both must match the drive for the belt to run correctly.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt. If it reads P-1408-S8M-540, or the drive specifies an STD profile at 1408 mm, this is the correct part number to quote.
- What should I send to get a quote?
- Send the part number P-1408-S8M-540 by WhatsApp or email. If you are unsure, include a photo of the old belt marking and the drive so the team can confirm or suggest an equivalent.