Timing belt Movendis P-1376-S8M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear S-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1376-S8M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1376-S8M-450 and any equivalents.
The Movendis P-1376-S8M-450 is a curvilinear S-type timing belt with an STD profile and a 1376 mm length. This synchronous belt is used where a drive must hold a fixed relationship between the pulleys, such as camshaft and crankshaft drives, pump drives and other indexing or positioning drives. The curvilinear tooth form is common on drives that need smooth engagement and accurate registration.
When you are confirming fit, the two values to check first are the profile and the length. This belt is listed as STD profile at 1376 mm. Compare those against the marking on the back of the belt you are removing and against the drive's pulley grooves and center distances. A belt that matches in profile and length but is fitted to worn or misaligned pulleys will not run correctly, so inspect the sprockets, flanges and tensioner at the same time.
If the old belt's marking is worn off or unreadable, measure the length and identify the tooth profile from the pulleys rather than from the belt alone. Send us the part number you have, or the profile and length you measured, and our team can confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- STD
- Length
- 1376mm
Frequently asked questions
- What do I need to send to get a quote for this belt?
- Send the part number P-1376-S8M-450, or the profile and length from the belt marking. If you are replacing a belt with an unreadable marking, include the equipment make and model and the pulley details so we can confirm the match.
- What are the profile and length of this belt?
- The Movendis P-1376-S8M-450 is listed with an STD profile and a length of 1376 mm.
- Should timing belts on the same drive be replaced together?
- On drives that use more than one belt, replacing them as a set keeps the drive matched and avoids mixing a new belt with a worn one. It is also a good time to check pulley teeth, flanges and tensioner condition.