Timing belt Movendis P-1352-D/8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1352-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1352-D/8M-180 and any equivalents.
The Movendis P-1352-D/8M-180 is a double-sided timing belt from the Curvilinear Double-Sided Timing Belts series, with a 1352 mm length. This page helps you match it to the belt you are replacing.
Start with the marking on the old belt. If it reads P-1352-D/8M-180, you have the part number to quote. If the marking is worn or unreadable, measure the old belt and note the profile and the 1352 mm length, then send those details with a photo of the belt and the drive.
Double-sided timing belts drive from both faces, so confirm the replacement has teeth on both sides. Check that the profile and the 1352 mm length match the belt you are removing. If the drive runs two belts, replace them as a set so both carry the same load.
Send the part number P-1352-D/8M-180 by WhatsApp or email to request a quote. If you are unsure about the match, include the old belt marking, the profile, the 1352 mm length, and any drive details you have. We reply promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 1352mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Compare the marking on the old belt with P-1352-D/8M-180. Also check that the profile and the 1352 mm length match, and that the belt has teeth on both sides.
- What should I send for a quote?
- Send the part number P-1352-D/8M-180 by WhatsApp or email. If you are unsure of the match, include the old belt marking, the profile, the 1352 mm length, and a photo of the belt and drive.
- Should I replace both belts on a two-belt drive?
- Yes. Replace timing belts in sets so both belts carry the same load and wear evenly.