Timing belt Movendis P-1296-8M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1296-8M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1296-8M-480 and any equivalents.
The Movendis P-1296-8M-480 is a curvilinear H-type timing belt with an HTD 8M profile, a 1296 mm length and an 8 mm pitch. If you are replacing a worn synchronous belt, this page gives you the three markings to check before you order.
Start with the belt in your hand. Read the marking printed on the back and compare it against the profile and the length. The profile on this belt is HTD 8M, and the length is 1296 mm. The pitch is 8 mm. All three values have to line up with the belt you are removing; a belt that matches on length but not on profile will not seat correctly in the pulley grooves.
Next, look at the drive itself. Check the pulleys for worn grooves, and check the tensioner and idler for play or roughness. A belt that failed early usually points to something else on the drive, so it is worth a look before the new belt goes on. If the drive runs more than one belt, replace them as a set so the load stays even.
When you are ready, send the part number P-1296-8M-480 to our team by WhatsApp or email. If you are not certain the number on your old belt is the right one, send us the marking from the back of the belt and we will help confirm it or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1296mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Compare the marking on your old belt with the profile HTD 8M, the length 1296 mm and the pitch 8 mm listed for the P-1296-8M-480. If all three match, the belt is the right size for the drive.
- What should I send to request a quote?
- Send the part number P-1296-8M-480 by WhatsApp or email. If you only have the old belt, send the marking from the back of it and we will help confirm the right belt or suggest an equivalent.
- Should I replace more than one belt at a time?
- If the drive uses multiple belts, replace them as a set. Mixing a new belt with worn belts on the same drive can load them unevenly.