Timing belt Movendis P-1280-8M-540
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1280-8M-540 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1280-8M-540 and any equivalents.
The Movendis P-1280-8M-540 is a curvilinear H-type timing belt with an HTD 8M profile, a 1280 mm length and an 8 mm pitch. It is used in synchronous drives where the belt teeth mesh with pulley grooves to maintain position between the shafts. Use the profile and length to confirm fit against the old belt or the drive specification.
Timing belts of this type are common on industrial drives that require synchronization rather than friction, such as camshafts, pumps, conveyors and positioning axes. The HTD 8M profile and 1280 mm length are the two dimensions to verify first. Check that the pulley grooves match the 8M curvilinear tooth form and that the belt path allows the stated length without forcing the belt over flanges.
The most direct way to confirm a replacement is to read the marking on the back of the old belt. If the old belt is worn or the marking is unreadable, measure the length along the belt and count the teeth, then compare with the profile and pitch. The P-1280-8M-540 is the part number to quote if those details match.
When ordering, send the part number, the belt profile and the length. If you are replacing more than one belt on the same drive, include the quantity and any drive details that help confirm the correct item. The team can review the part number and reply with a quote.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1280mm
Frequently asked questions
- How do I confirm the P-1280-8M-540 fits my drive?
- Check the old belt marking for the HTD 8M profile and the 1280 mm length. Also confirm the pulley grooves are cut for an 8M curvilinear tooth form and that the 8 mm pitch matches the drive specification.
- What does the part number tell me?
- The part number identifies this as a Movendis curvilinear H-type timing belt. The profile is HTD 8M, the length is 1280 mm and the pitch is 8 mm.
- What should I send to request a quote?
- Send the part number P-1280-8M-540, the quantity you need and any drive details you have. If you are unsure, include the old belt marking or the profile and length so the team can confirm the correct belt.