Timing belt Movendis P-1260-D/T10-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Metric Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1260-D/T10-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1260-D/T10-180 and any equivalents.
The Movendis P-1260-D/T10-180 is a double-sided timing belt with a 1260 mm length. It is built for drives that need teeth on both faces to turn shafts in opposite directions from a single belt run. Use the part number and the 1260 mm length to match the belt you are replacing.
To match this belt to the one being replaced, read the marking on the back of the old belt and compare it with the part number and length shown here. Confirm that the drive uses a double-sided timing belt, since a single-sided belt will not transmit correctly on both faces. Check the length against the 1260 mm figure before ordering.
If the marking is worn or unreadable, measure the old belt and note the drive layout, including the number of pulleys and the direction each shaft turns. Send that information with the part number to our team, and we will help confirm the right belt or suggest an equivalent.
The Movendis P-1260-D/T10-180 is part of the Metric Double-Sided Timing Belts series. When you request a quote by WhatsApp or email, include the part number and the 1260 mm length so we can respond promptly.
Dimensions
- Length
- 1260mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Compare the part number and the 1260 mm length with the marking on the belt you are replacing. Make sure the drive requires a double-sided timing belt.
- What should I send with my quote request?
- Send the part number P-1260-D/T10-180 and the 1260 mm length. If the old belt marking is unreadable, include the drive details and we will help confirm the right belt.
- Can you help if I cannot read the old belt marking?
- Yes. Send the drive layout and the belt dimensions you can measure, and our team will help match it to the P-1260-D/T10-180 or suggest an equivalent.