Timing belt Movendis P-1245-3M-480

MOVENDIS P-1245-3M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1245-3M-480 and any equivalents.

This Movendis belt is a curvilinear H-type timing belt in the HTD 3M profile. It has a 1245 mm length and a 3 mm pitch. It is used in drives where a synchronous belt must mesh with matching 3M pulleys.

HTD 3M timing belts are common on light-duty industrial drives such as small conveyors, packaging equipment, office machines and positioning axes. The curvilinear tooth profile engages a pulley of the same profile, so the belt runs at a fixed ratio without slip. The 3 mm pitch and 1245 mm length identify the belt's geometry; both values must match the drive before installation.

To confirm fit, read the marking on the back of the old belt and compare it with P-1245-3M-480. Check that the drive uses an HTD 3M pulley and that the belt path gives the required length. If the marking is worn or the belt is missing, measure the pulley profile and the drive center distance, then send those details with your quote request.

When you request a quote, include the part number P-1245-3M-480 and the quantity needed. If you are replacing a belt on a drive that runs several belts, note that the other belts in the set may also need attention. Our team can confirm the belt or suggest an equivalent based on the data you provide.