Timing belt Movendis P-1225-5M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1225-5M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1225-5M-480 and any equivalents.
When a synchronous drive needs a replacement, the most reliable starting point is the marking on the back of the old belt. The Movendis P-1225-5M-480 is a Curvilinear H-Type timing belt with an HTD 5M profile, a 1225 mm length and a 5 mm pitch. We carry this belt for maintenance, engineering and purchasing teams who match by the existing part number.
Read the old belt carefully before ordering. The back typically shows the profile and the length, and those two values are what you match. This belt is HTD 5M with a 1225 mm length and a 5 mm pitch. If the marking is worn or unreadable, measure the length and count the teeth so we can confirm the correct belt.
The Curvilinear H-Type construction is intended for synchronous drives where the belt teeth mesh with a matching pulley groove. Inspect the pulleys at the same time: worn sprockets, misalignment and incorrect tension shorten belt life. Replace the belt when you see cracked teeth, exposed cord or unusual wear on the tooth flanks.
Send the part number P-1225-5M-480 by WhatsApp or email to request a quote. If you are unsure of the profile or length, send a photo of the old belt marking and the pulley details, and our team will help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 1225mm
Frequently asked questions
- How do I confirm this is the correct belt for my drive?
- Check the marking on the back of the old belt. The profile should read HTD 5M and the length should be 1225 mm. If the marking is not clear, send us the pulley information and we will help confirm.
- What should I send with my quote request?
- Send the part number P-1225-5M-480, and if possible a photo of the old belt marking and the number of teeth on the pulleys. That helps us verify the profile and length.
- Can you help if the old belt marking is worn off?
- Yes. Measure the belt length and count the teeth, or send photos of the drive and pulleys. We will help identify the correct timing belt for the application.