Timing belt Movendis P-1200-D/S8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1200-D/S8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1200-D/S8M-180 and any equivalents.
The Movendis P-1200-D/S8M-180 is a double-sided timing belt from the Curvilinear Double-Sided Timing Belts series. It has a 1200 mm length. When you are replacing a belt, the most reliable starting point is the part number printed on the old belt and the length marked on it.
To match this belt to the one being replaced, read the marking on the back of the old belt and compare it with P-1200-D/S8M-180. Confirm the profile and the 1200 mm length. If the marking is worn or unreadable, measure the old belt and note the tooth profile so the replacement can be checked against the same series and length.
A double-sided timing belt drives from both faces, so it is used where the belt must turn more than one pulley in the same drive. Before fitting the new belt, inspect the pulleys for wear, check the tensioner and idler condition, and confirm the belt path matches the old routing. If the drive uses more than one belt, replace them as a set so the load stays even.
Send the part number P-1200-D/S8M-180, the profile and the 1200 mm length when you request a quote. If you are unsure about the exact replacement, include a photo of the old belt marking and the drive layout. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 1200mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the part number on the back of the old belt. If it matches P-1200-D/S8M-180, and the profile and 1200 mm length agree, it is the correct replacement. If the marking is not clear, measure the old belt and send the details for confirmation.
- What should I check before installing a double-sided timing belt?
- Inspect the pulleys for wear or damage, check the tensioner and idler bearings, and make sure the belt path matches the original routing. On drives with more than one belt, replace all belts at the same time.
- What information do you need to quote this belt?
- Send the part number P-1200-D/S8M-180, the profile and the 1200 mm length. If you are replacing a belt with a worn marking, include a photo of the old belt and the drive so the team can confirm the match.