Timing belt Movendis P-1200-D/5M-180

MOVENDIS P-1200-D/5M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1200-D/5M-180 and any equivalents.

The Movendis P-1200-D/5M-180 is a curvilinear double-sided timing belt in the Curvilinear Double-Sided Timing Belts series. It carries a 1200 mm length, so the profile and the length are the two figures to check first against the belt you are replacing.

Because both faces of a double-sided timing belt carry teeth, the belt can drive from either side of the same run. That is the reason this construction appears on drives where two shafts are driven from one belt path and both need to turn in the same direction, or where the layout leaves no room for a second belt. Confirm the tooth profile matches the pulleys before ordering, since a curvilinear profile and a different profile are not interchangeable on the same sprocket.

The 1200 mm length is stated on the belt marking. Read the back of the old belt and match both the part number and the length before you send the request. If the marking is worn, measure the installed belt path only as a cross-check, and include the drive details with your quote request so we can confirm the right belt or suggest an equivalent.

Double-sided timing belts are normally replaced as a set with the pulleys and tensioner inspected at the same time. Check tooth wear, cracking at the roots, and any exposed cord along both faces, then look at pulley groove wear and alignment. A belt that has run out of alignment will show edge wear on one side, and a new belt on worn pulleys will not correct that.