Timing belt Movendis P-1200-5M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1200-5M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1200-5M-480 and any equivalents.
The Movendis P-1200-5M-480 is a curvilinear H-type timing belt with an HTD 5M profile, a 1200 mm length and a 5 mm pitch. When you are replacing a belt on a synchronous drive, this part number is the reference point for matching the belt that comes off the machine.
Start by reading the marking on the back of the belt being replaced. Compare it against the Movendis P-1200-5M-480: the profile is HTD 5M, the length is 1200 mm and the pitch is 5 mm. A match on those three values is what confirms the replacement before the drive is reassembled.
If the old marking is worn or unreadable, measure the belt and inspect the pulleys. The HTD 5M profile and 1200 mm length identify this belt; the 5 mm pitch is the spacing that must agree with the pulley grooves. Send the part number and any photos of the old belt and the drive to MR Industrial Accessories for a quote.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 1200mm
Frequently asked questions
- How do I confirm the Movendis P-1200-5M-480 matches the belt I am replacing?
- Check the marking on the back of the old belt for the profile, length and pitch, then compare them with the HTD 5M profile, 1200 mm length and 5 mm pitch of the P-1200-5M-480. If the old marking is not readable, measure the belt and inspect the pulley grooves.
- What information should I send to request a quote for this belt?
- Send the part number P-1200-5M-480, along with the belt marking or dimensions if you have them. The team at MR Industrial Accessories replies by WhatsApp or email and can help confirm the right belt.
- Can I order this belt for a drive that uses more than one belt?
- Yes. On drives with multiple belts, replace the full set at the same time and keep the profile, length and pitch consistent across the set. The P-1200-5M-480 is an HTD 5M belt with a 1200 mm length and 5 mm pitch.