Timing belt Movendis P-1176-S8M-960

MOVENDIS P-1176-S8M-960 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1176-S8M-960 and any equivalents.

The Movendis P-1176-S8M-960 is a curvilinear S-Type timing belt with an STD profile and a 1176 mm length. We carry it for maintenance and purchasing teams who need a synchronous belt matched to a specific drive. Send us the part number and we will confirm it against your application.

Timing belts in this family are used where a drive has to hold a fixed relationship between two shafts, so they turn in step rather than simply transmit torque. Curvilinear S-Type construction suits synchronous drives that run at higher tooth loads than a standard trapezoidal profile handles comfortably. The STD profile and 1176 mm length are the two figures to check first, since either one being wrong will keep the belt from seating correctly on the pulleys.

Confirming fit starts with the marking on the back of the old belt. Read the full part number, then compare it with the profile and length on the drive's documentation. Inspect the pulleys at the same time for worn or hooked teeth, and check the tensioner and idler for play or rough bearings. A belt that has run with a bad tensioner will not last, regardless of the replacement.

On drives with more than one belt, replace the set together so the load stays even across the sheaves. Keep the old belt until the new one is on and tensioned, and note the running direction before you remove it. If the marking on the belt is worn off, send us the drive details and a photo, and we will help identify the correct replacement.