Timing belt Movendis P-1176-D/8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1176-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1176-D/8M-180 and any equivalents.
When a drive runs two pulleys that must turn in opposite directions, the belt that makes it work is a double-sided timing belt. This Movendis belt is part of the Curvilinear Double-Sided Timing Belts series and measures 1176 mm in length. The marking on the back of the old belt is the fastest way to confirm you are specifying the same part.
Read the old belt before you remove it. Write down the full code, including any prefix and the length figure, exactly as it appears. Compare that code to P-1176-D/8M-180. If the numbers and letters match, you have the correct replacement for the drive.
A double-sided timing belt has teeth on both faces, so it can drive pulleys from either side in a serpentine or reversing layout. This belt is 1176 mm long. The curvilinear tooth profile is designed for smooth engagement and consistent timing. Confirm the width and tooth pitch against the pulleys before ordering.
If the marking is worn or unreadable, measure the old belt and note the pulley dimensions. Send the part number, a photo of the marking, and any drive details to our team by WhatsApp or email. We carry the Movendis line and will confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 1176mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Locate the marking on the back of the old belt and compare it to P-1176-D/8M-180. If the code matches and the belt is 1176 mm long, it is the correct replacement. If the marking is unreadable, send us the drive details and a photo.
- What should I send with my quote request?
- Send the part number P-1176-D/8M-180, the length if you have it, and a photo of the old belt marking. If you are unsure, include the pulley dimensions and the number of teeth. We will reply promptly with a quote or an equivalent.
- Can you help if the old belt marking is worn off?
- Yes. Measure the length and width of the old belt and note the pulley sizes. Send those details to our team by WhatsApp or email. We will help identify the correct double-sided timing belt for your drive.