Timing belt Movendis P-1160-D/8M-180

MOVENDIS P-1160-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1160-D/8M-180 and any equivalents.

This Movendis P-1160-D/8M-180 is a double-sided timing belt from the Curvilinear Double-Sided Timing Belts series, with a length of 1160 mm. Double-sided timing belts are used on drives where two shafts must turn in opposite directions from a single belt, such as certain camshaft-to-camshaft and auxiliary drives. Confirm fit by matching the part number and the 1160 mm length to the belt you are replacing.

On a double-sided timing belt, teeth are cut on both faces, so the belt can drive a pulley from either side. That layout is common where space or routing makes a standard single-sided belt impractical. Because the profile and length both matter, the safest check is to read the marking on the back of the old belt and compare it with P-1160-D/8M-180 and the 1160 mm length.

Inspect the drive before ordering. Look for worn or chipped teeth, exposed cord, cracks at the roots of the teeth, and glazing on the pulley contact faces. Check pulley flanges and tensioners for roughness or play, and confirm the belt runs straight without rubbing the flanges. If a drive uses more than one belt, replace them as a set so the load stays even.

Send the part number, the 1160 mm length, and a photo of the back marking if you have one. If the marking is worn away, include the machine or drive details and the pulley tooth count so we can help confirm the right belt or suggest an equivalent.