Timing belt Movendis P-1160-5M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1160-5M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1160-5M-450 and any equivalents.
This Movendis P-1160-5M-450 belt is a curvilinear H-type timing belt with an HTD 5M profile, a 1160 mm length and a 5 mm pitch. It suits compact synchronous drives where positive engagement and registration are required. Confirm fit by matching the belt marking and the drive's pulley profile before ordering.
HTD 5M timing belts are common on small, high-ratio drives such as those found in office equipment, light conveyors, packaging machinery and positioning axes. The curvilinear tooth form engages the matching pulley grooves to maintain synchronization without slip. If your drive uses 5M pulleys, this belt is the correct profile family.
To confirm the replacement, read the marking on the back of the old belt. Look for the profile (HTD 5M), the length (1160 mm) and the part number. Check that the pulley teeth are clean and undamaged, and that the belt tracks straight without rubbing on flanges. If the marking is worn, measure the outside circumference and count the teeth to verify the length.
For a quote, send the part number P-1160-5M-450 by WhatsApp or email. If you are unsure of the exact belt, include a photo of the old belt marking and the pulley, and our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 1160mm
Frequently asked questions
- How do I know if this belt fits my drive?
- Check that your pulleys are HTD 5M profile and that the required belt length is 1160 mm. The old belt marking is the best reference. If it reads HTD 5M 1160, this belt matches.
- Can I replace a timing belt with a different profile?
- No. The pulley grooves and the belt tooth profile must match. An HTD 5M belt requires HTD 5M pulleys. Using a different profile will cause poor engagement and rapid wear.
- What information should I send with my quote request?
- Send the part number P-1160-5M-450. If you are unsure, include the old belt marking, the pulley tooth count and a photo. Our team will confirm the belt or suggest an equivalent.