Timing belt Movendis P-1144-S8M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear S-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1144-S8M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1144-S8M-450 and any equivalents.
The Movendis P-1144-S8M-450 is a curvilinear S-type timing belt with an STD profile and a length of 1144 mm. It is built for drives that require precise synchronization. To match it to the belt being replaced, compare the marking on the back of the old belt and confirm the profile and length.
When matching this belt to the one being replaced, start by locating the part number on the old belt. The marking should read P-1144-S8M-450. If the old belt is worn or the marking is unreadable, measure the length in millimeters and identify the profile as STD. These two values are the primary selection criteria for this belt.
A timing belt must match the drive's pulleys and the required length. The P-1144-S8M-450 has a curvilinear S-type construction and an STD profile, and its length is 1144 mm. If the old belt shows a different profile or length, it is not the same belt. Do not substitute a belt with a different profile or length, as it will not fit or function correctly.
For a quote, send the part number P-1144-S8M-450 by WhatsApp or email. If you are unsure whether this is the correct belt, include a photo of the old belt's marking and the drive setup. The team can help confirm the right belt or suggest an equivalent based on the information you provide.
Dimensions
- Profile
- STD
- Length
- 1144mm
Frequently asked questions
- How do I confirm the Movendis P-1144-S8M-450 is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. It should match P-1144-S8M-450. If it does not, compare the profile and length: this belt has an STD profile and a length of 1144 mm.
- What should I send to get a quote for this belt?
- Send the part number P-1144-S8M-450 by WhatsApp or email. If you want us to confirm it is the correct belt, include a photo of the old belt's marking and details of the drive.
- Can I use a belt with a different profile or length if it looks similar?
- No. Timing belts must match the drive's pulleys and length. A different profile or length will not fit or function correctly. Use only a belt with the same profile and length as the P-1144-S8M-450.