Timing belt Movendis P-1140-5M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1140-5M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1140-5M-450 and any equivalents.
This Movendis P-1140-5M-450 is a curvilinear H-type timing belt with an HTD 5M profile, a 1140 mm length and a 5 mm pitch. It suits synchronous drives where positive engagement and clean tooth meshing are required.
HTD 5M timing belts are commonly found on light-duty industrial drives, positioning axes, small conveyors and similar equipment that runs on toothed pulleys rather than friction. The curvilinear tooth form is intended to mesh smoothly with matching HTD 5M sprockets, so the drive stays synchronized under normal operating loads.
To confirm fit, read the marking on the back of the old belt and compare it with the profile and length on this page. Check that the pulleys are HTD 5M and that the belt width matches the pulley groove. If the marking is worn or unreadable, measure the pitch and the length along the belt and send those figures with your quote request.
Send the part number P-1140-5M-450 by WhatsApp or email to request a quote. If you are unsure whether this is the correct belt for your drive, include the old belt marking or the pulley details and our team will help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 1140mm
Frequently asked questions
- How do I confirm that this Movendis belt fits my drive?
- Check the marking on the old belt against the HTD 5M profile and 1140 mm length shown here. Also verify that the pulleys are HTD 5M and that the belt width matches the pulley groove.
- What should I send with my quote request?
- Send the part number P-1140-5M-450. If you are replacing an unmarked belt, include the old belt marking or the pulley details so we can help confirm the correct belt.
- Can you help if this exact belt is not the right one?
- Yes. Our team can review the details you send and help confirm the right belt or suggest an equivalent.