Timing belt Movendis P-1125-5M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1125-5M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1125-5M-480 and any equivalents.
The Movendis P-1125-5M-480 is a Curvilinear H-Type timing belt with an HTD 5M profile, a 1125 mm length and a 5 mm pitch. Before you fit it, inspect the drive and sheaves so the new belt runs true from the start.
Check the sheaves for worn grooves, burrs, or debris that can damage the belt teeth. Confirm the sheave profile matches HTD 5M and that the teeth are clean. Misalignment between sheaves will shorten belt life, so verify parallelism and shaft movement before installation.
The P-1125-5M-480 uses a curvilinear tooth shape for smooth engagement. Its 1125 mm length and 5 mm pitch must match the drive's center distance and pulley sizes. If you are replacing an existing belt, read the marking on the back to confirm the part number and compare it with the data here.
When you request a quote, send the part number P-1125-5M-480 and the quantity you need. If you are unsure whether this belt fits your drive, include the sheave tooth count, center distance, and width so we can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 1125mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheaves for wear, burrs, and debris, and verify that they are aligned and parallel. Confirm the sheave profile is HTD 5M and that the teeth are clean.
- How do I confirm this is the correct belt for my application?
- Compare the marking on your existing belt with the part number P-1125-5M-480. Also check that the profile, 1125 mm length, and 5 mm pitch match your drive requirements.
- What information should I send with my quote request?
- Send the part number P-1125-5M-480 and the quantity you need. If you want help confirming the fit, include the sheave tooth count, center distance, and belt width.