Timing belt Movendis P-1120-D/14M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1120-D/14M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1120-D/14M-180 and any equivalents.
The Movendis P-1120-D/14M-180 is a curvilinear double-sided timing belt with a length of 1120 mm. Before you install it, inspect the drive and sheaves so the new belt seats and tracks correctly from the first run.
Check both sides of the drive for worn or hooked teeth, chipped flanges, and grooves that have taken a set. On a double-sided timing belt, both faces carry teeth, so any damage on either side of the pulleys can affect tooth engagement. Clean the sheaves and confirm they are free of debris, burrs or rust that could cut the belt.
Verify that the pulleys are aligned and that the shafts turn freely. Misalignment or a tight bearing will show up as edge wear or a hot running belt, even when the part number and length match. Set tension according to your drive documentation, then recheck after the first period of running.
The Movendis P-1120-D/14M-180 is identified by its part number and 1120 mm length. To request a quote, send the part number and the quantity you need by WhatsApp or email, and the team will confirm the belt or suggest an equivalent.
Dimensions
- Length
- 1120mm
Frequently asked questions
- What should I check on the drive before fitting the P-1120-D/14M-180?
- Inspect both sides of the pulleys for worn teeth, damaged flanges and debris, confirm alignment, and make sure the shafts turn freely. A double-sided timing belt contacts both faces, so both sides of the drive matter.
- How do I identify this belt on the machine?
- Look for the part number P-1120-D/14M-180 on the belt. The length is 1120 mm. If the marking is worn, measure the old belt and send the part number for confirmation.
- How do I request a quote for the Movendis P-1120-D/14M-180?
- Send the part number P-1120-D/14M-180 and the quantity you need by WhatsApp or email. The team will reply promptly to confirm the belt or suggest an equivalent.