Timing belt Movendis P-1104-8M-370

MOVENDIS P-1104-8M-370 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1104-8M-370 and any equivalents.

The Movendis P-1104-8M-370 is a curvilinear H-type timing belt with an HTD 8M profile, an 8 mm pitch, and a 1104 mm length. Before fitting this belt, inspect the drive and sheaves to avoid premature wear.

Check sheave grooves for wear, debris, or damage. Worn sheaves can cause the new belt to seat incorrectly, leading to noise, vibration, or rapid failure. Verify that the sheaves are aligned and that the bearings turn freely. Confirm the drive's speed and load are within the belt's capacity.

When replacing the belt, loosen the tensioner and remove the old belt without prying it over the flanges. Inspect the tensioner and idler pulleys for smooth operation. Clean the sheaves with a soft brush and non-oil-based cleaner. Install the new belt by hand, then adjust tension according to the drive manufacturer's specification.

After installation, run the drive for a short period and recheck tension. Listen for unusual noise and check for proper tracking. Re-tension if needed. Keep the area free of oil, water, and dust to extend belt life.