Timing belt Movendis P-1072-8M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1072-8M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1072-8M-480 and any equivalents.
The Movendis P-1072-8M-480 is a Curvilinear H-Type timing belt with an HTD 8M profile, 1072 mm length and 8 mm pitch. We carry it for maintenance and engineering teams that need to match a belt to the drive being replaced. Confirm the profile, length and pitch against the old belt before ordering.
Start by reading the marking on the back of the belt you are replacing. The profile must match HTD 8M, and the length must match 1072 mm. The pitch of 8 mm is part of the same specification, so a belt with a different profile or length will not sit correctly in the pulleys.
If the marking is worn or unreadable, measure the belt and compare the result to the part number. The P-1072-8M-480 is a timing belt, so the tooth profile and length are the critical dimensions. Do not substitute a belt with a different profile or length.
Send the part number, the profile and the length in your quote request. If you are unsure, send a photo of the old belt and the drive. We will confirm the Movendis P-1072-8M-480 or help you find the correct replacement.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1072mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the old belt. It must show HTD 8M profile and 1072 mm length. The pitch is 8 mm. If those match, the P-1072-8M-480 is the correct part.
- What should I send to get a quote?
- Send the part number P-1072-8M-480, or the profile and length from the old belt. A photo of the belt and the drive helps us confirm the match.
- Can I replace just one belt in a set?
- For drives with multiple belts, replace all belts in the set at the same time. Mixing a new belt with worn belts can cause uneven load and premature failure.