Timing belt Movendis P-1000-8M-370
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1000-8M-370 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1000-8M-370 and any equivalents.
The Movendis P-1000-8M-370 is a curvilinear H-type timing belt with an HTD 8M profile and a 1000 mm length. The 8 mm pitch identifies the tooth spacing, so this belt fits drives built for the 8M profile. Use these three values to match the belt to your drive before you order.
The profile determines the pulley the belt runs on. HTD 8M is a curvilinear tooth profile, and the 8 mm pitch is the distance from one tooth center to the next. The 1000 mm length is the belt's datum length. A replacement must match all three: profile, pitch and length. If the marking on the back of the old belt reads 8M and 1000, this part number is the correct size.
For a quote, send the part number P-1000-8M-370, or send the profile and length from the old belt. If you are unsure of the profile, photograph the back of the belt and the pulley teeth. We carry the Movendis line and can confirm the right belt for your drive.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1000mm
Frequently asked questions
- What do the profile and length on this belt mean?
- HTD 8M is the tooth profile, 8 mm is the pitch between tooth centers, and 1000 mm is the belt length. All three must match the drive.
- How do I confirm this is the right belt?
- Check the marking on the back of the old belt. If it shows 8M and 1000, the P-1000-8M-370 matches that size.
- What should I send to request a quote?
- Send the part number P-1000-8M-370, or the profile and length from your old belt. If needed, include a photo of the belt and pulley.