V-belt Movendis HPe 18699-30
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- HPe
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS HPe 18699-30 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for HPe 18699-30 and any equivalents.
The Movendis HPe 18699-30 is a CVT belt for motorcycles and scooters, built to the 699 mm outside length and 18.4 mm width called for by the drive. Its 30° angle matches the pulley geometry, so the belt runs at the correct depth in the sheaves.
For buyers, the profile and length are the first check. This belt measures 699 mm outside length and 18.4 mm in width, with a 30° angle. Those three figures tell you whether the belt will sit correctly in the variator and driven pulley on the machine in front of you. If your old belt is worn or unmarked, measure the outside length and width and compare them to these values.
Movendis lists the HPe 18699-30 as an equivalent to Dayco 8019-W. The application listed is the Suzuki AH 100 ADRESS. If you are replacing a belt on that model, this is the reference to quote.
When you request a quote, send the part number 18699-30, the machine make and model, and the marking from the back of the old belt if it is still readable. That lets us confirm the correct belt or suggest an equivalent from what we carry.
Dimensions
- Length
- 699mm
Frequently asked questions
- What does the 30° angle mean on this CVT belt?
- The 30° angle is the included angle of the belt's cross-section. It is matched to the pulley sheave angle so the belt contacts the pulleys correctly and can shift through the ratio range as intended.
- How do I confirm this belt fits my Suzuki AH 100 ADRESS?
- Check the outside length and width of your old belt against 699 mm and 18.4 mm. If the old belt is unmarked, measure it and send those figures with your quote request so we can confirm the match or suggest an equivalent.
- What should I send with my quote request?
- Send the part number 18699-30, the machine make and model, and the marking from the back of the old belt if it is readable. If you have the old belt in hand, the outside length and width are also helpful.