V-belt Movendis HP+ 331890-30
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- HP+
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS HP+ 331890-30 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for HP+ 331890-30 and any equivalents.
The Movendis HP+ 331890-30 is a CVT belt for the Yamaha T-MAX 530 from 2012 to 2019. To match the belt you are replacing, compare the markings on the back of the old belt and the measured dimensions against this listing. The manufacturer lists cross-references to Bando B2-1239, OE BC3-17641-00 and OE 34B-17461-00.
This belt has an outside length of 889.92 mm, a width of 31.2 mm and a 30° angle. The profile and length are the key figures for confirming a match; measure the old belt with a caliper and tape for width and outside length, and check the angle if the old belt is still intact. If the numbers align, the belt is the correct fit for the T-MAX 530 application listed.
The cross-references give you additional ways to confirm the match. If the old belt is marked Bando B2-1239, OE BC3-17641-00 or OE 34B-17461-00, this Movendis HP+ belt is listed as an equivalent. The same size is also listed under other brands in some cases, but always verify the dimensions and the application before ordering.
For a quote, send the part number 331890-30, the machine model and year, and a photo of the old belt marking if you have it. The team can confirm the right belt or suggest an equivalent from the information you provide. This helps avoid a mismatch on a drive that sees regular use.
Dimensions
- Length
- 889.92mm
Frequently asked questions
- How do I confirm this belt fits my Yamaha T-MAX 530?
- Check that your machine is a Yamaha T-MAX 530 from 2012 to 2019. Then compare the dimensions of your old belt to the 889.92 mm outside length, 31.2 mm width and 30° angle listed here. If the old belt is marked Bando B2-1239, OE BC3-17641-00 or OE 34B-17461-00, this belt is listed as an equivalent.
- What measurements should I take from the old belt?
- Measure the outside length and the width with a tape or caliper. If the old belt is not too worn, you can also check the angle. Compare those figures to the 889.92 mm length, 31.2 mm width and 30° angle of the Movendis HP+ 331890-30.
- What information do you need for a quote?
- Send the part number 331890-30, the machine model and year, and a photo of the old belt marking if you have one. The team can then confirm the correct belt or suggest an equivalent.