V-belt Mitsuboshi Z 44
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI Z 44 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Z 44 and any equivalents.
The Mitsuboshi Z 44 is a classical V-belt in the Z profile. To match it to the belt you are replacing, read the marking on the back of the old belt and compare it with this part number. This page covers what to check before you request a quote.
Start with the belt itself. The Z 44 carries a Z profile and the length or size designation 44. If the old belt is still readable, its back typically shows a profile letter and a size number; those are the two values to line up against this belt. If the marking is worn off, measure the old belt and note the drive it runs on, then send that information with your request.
A classical V-belt like the Z 44 is used where a standard cross-section is called for. Before ordering, inspect the sheaves for wear, oil or debris, and check that the belt sits correctly in the groove. If a drive runs more than one belt, replace the set together so the belts share the load evenly.
We carry the Mitsuboshi Z 44 and quote it by part number. Send the part number, the quantity, and the machine or drive it fits by WhatsApp or email, and the team will confirm the belt or suggest an equivalent. If you are unsure whether the Z profile is the right one, include a photo of the old belt marking.
Dimensions
- Section
- Z
Frequently asked questions
- How do I confirm the Z 44 is the belt I need?
- Read the profile letter and size number on the back of the belt being replaced. This belt is a Z profile with the 44 designation. If the old marking matches, the part number matches.
- What should I send to request a quote?
- Send the part number Z 44, the quantity, and the equipment or drive it fits, by WhatsApp or email. A photo of the old belt marking helps confirm the profile and size.
- Should I replace more than one belt at a time?
- On a drive that uses multiple belts, replace the set together. Mixing a new belt with worn belts can cause uneven loading across the drive.