V-belt Mitsuboshi SPZ 2750
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 2750 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 2750 and any equivalents.
The Mitsuboshi SPZ 2750 is a narrow wedge V-belt with an SPZ profile, a top width of 9.7 mm, a height of 8 mm, and a 40-degree angle. We carry this belt for maintenance, engineering, and purchasing teams who need an exact replacement. To get a quote, send the part number and the quantity you need.
When you request a quote for the SPZ 2750, include the full part number and the quantity required. If you are replacing a belt on an existing drive, send the complete marking from the back of the old belt. This helps us confirm the profile and length before we reply. The SPZ profile is a narrow wedge V-belt, and the 2750 indicates the length in millimeters.
If the old belt is worn or the marking is unreadable, measure the top width and height and note the drive sheave groove angle. The SPZ 2750 has a top width of 9.7 mm, a height of 8 mm, and a 40-degree angle. Providing these dimensions along with the part number helps us match the belt to your drive.
For drives that use multiple belts, request a quote for the full set so all belts can be replaced together. Send the part number, the number of belts per drive, and any other details from the old belt marking. We will reply with the information you need to complete the replacement.
Dimensions
- Section
- SPZ
Frequently asked questions
- What information should I include when requesting a quote for the Mitsuboshi SPZ 2750?
- Send the part number SPZ 2750, the quantity you need, and the complete marking from the back of the old belt if you have it. If the belt is not readable, include the top width, height, and sheave groove angle.
- Can you help confirm the right belt if I only have the old belt?
- Yes. Send the full marking from the back of the old belt or the dimensions you can measure. We will compare the profile and length to the SPZ 2750 and confirm if it matches.
- Do you offer the SPZ 2750 as part of a set for a multi-belt drive?
- Yes. Request a quote for the number of belts your drive requires. Replacing all belts at the same time helps maintain even tension and performance.