V-belt Mitsuboshi SPZ 1637
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 1637 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1637 and any equivalents.
The Mitsuboshi SPZ 1637 is a narrow wedge V-belt in the SPZ profile. When a drive is down, the fastest way to confirm the right replacement is to match the belt you are removing. This page gives the key dimensions and what to send for a quote.
An SPZ profile belt has a top width of 9.7 mm, a height of 8 mm, and a 40° angle. The part number also carries the datum length: 1637 mm. Check the old belt for a matching profile and length before you order. If the marking is worn off, measure the top width and height with a caliper and compare them to these values.
The same size is also listed under Optibelt SPZ 1637. That gives you a second reference point when the old belt is still legible. If you find either number on the back of the belt, send it to us with the quantity you need. Our team can confirm the belt or suggest an equivalent.
For a quote, send the part number SPZ 1637, the quantity, and a photo of the belt marking if you have one. If the drive uses multiple belts, note how many are on the drive so you can replace them as a set. We reply by WhatsApp or email.
Dimensions
- Section
- SPZ
Frequently asked questions
- How do I confirm this is the belt I need?
- Match the profile and length. The SPZ 1637 has an SPZ profile, a top width of 9.7 mm, a height of 8 mm, a 40° angle, and a length of 1637 mm. Compare these to the marking or the dimensions of the belt being replaced.
- What should I send for a quote?
- Send the part number SPZ 1637, the quantity, and any marking from the old belt. If you are unsure, a photo of the belt and a measurement of the top width and height help us confirm it.
- Is the same size listed under another brand?
- Yes. The same size is also listed under Optibelt SPZ 1637. You can use either number as a reference when checking the belt on the drive.