V-belt Mitsuboshi SPZ 1487
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 1487 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1487 and any equivalents.
The Mitsuboshi SPZ 1487 is a narrow wedge V-belt in the SPZ profile. Its 9.7 mm top width, 8 mm height, 40° angle and 1487 mm length define the drive it fits, so the marking on the old belt is the fastest way to confirm the replacement.
For a maintenance or purchasing professional, the profile and length are the two dimensions that decide fit. SPZ sets the cross-section and the 40° angle that seats in the pulley groove; 1487 mm sets the belt's length around the drive. A belt with the same SPZ profile but a different length will not tension correctly, and a belt with the same length but a different profile will not sit in the groove. Check both against the drive before ordering.
The same size is also listed under Optibelt SPZ 1487. We carry Mitsuboshi narrow wedge V-belts and can help confirm the right belt or suggest an equivalent when you send the part number. If the old belt is worn or the marking is hard to read, measure the top width, height and length, and note the profile and any numbers on the back of the belt.
Dimensions
- Section
- SPZ
Frequently asked questions
- What do the profile and length tell me about this belt?
- SPZ is the narrow wedge profile, with a 9.7 mm top width, 8 mm height and 40° angle. The 1487 mm length is the belt's length around the drive. Both must match the drive for the belt to seat and tension correctly.
- How do I confirm the right belt from the old one?
- Read the marking on the back of the old belt and compare the profile and length. If the marking is gone, measure the top width, height and length, and send those figures with the part number.
- What should I send to request a quote?
- Send the part number, Mitsuboshi SPZ 1487, and the quantity you need. If you are replacing a belt on a drive, include the profile and length from the old belt so we can confirm the match.