V-belt Mitsuboshi SPZ 1287
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 1287 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1287 and any equivalents.
This Mitsuboshi SPZ 1287 is a narrow wedge V-belt with an SPZ profile, a 9.7 mm top width, an 8 mm height and a 40° angle. Before you fit it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check sheave grooves for wear, rust, burrs or embedded debris. Confirm the sheaves are aligned and that the groove angle and width suit an SPZ belt. A worn or misaligned groove will damage a new belt quickly, regardless of the belt's condition.
Measure the old belt's outside length and compare it with the SPZ 1287 marking on the back. If the drive uses multiple belts, replace the full set at the same time so the load is shared evenly. The same size is also listed under Stark SPZ 1287 and Optibelt SPZ 1287.
For a quote, send the part number SPZ 1287, the quantity needed and the drive it fits. Our team can confirm the right belt or suggest an equivalent based on your application.
Dimensions
- Section
- SPZ
Frequently asked questions
- How do I confirm the SPZ 1287 is the correct belt?
- Read the marking on the back of the old belt and match it to SPZ 1287. Also check the profile, top width and height against the sheave groove before ordering.
- What should I inspect before fitting this narrow wedge V-belt?
- Inspect sheave grooves for wear, alignment and damage. Clean the grooves and confirm they are suitable for an SPZ profile with a 9.7 mm top width and 8 mm height.
- Can I request a quote for the Mitsuboshi SPZ 1287?
- Yes. Send the part number SPZ 1287, the quantity and your drive details by WhatsApp or email, and our team will reply promptly.