V-belt Mitsuboshi SPZ 1112
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 1112 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1112 and any equivalents.
The Mitsuboshi SPZ 1112 is a narrow wedge V-belt in the SPZ profile, with a 9.7 mm top width, 8 mm height and a 40 degree angle. This page covers what the profile and length tell you when you are selecting a replacement or confirming a belt for a quote.
The SPZ profile is a narrow wedge section, so the belt is built to run in SPZ-section pulleys rather than a classical V-belt groove. The 9.7 mm top width and 8 mm height define the section, and the 40 degree angle is the included angle of the belt. All three figures need to match the pulley groove for the belt to seat and transmit load correctly.
The 1112 in the part number is the length reference, so the belt is ordered by profile and length together. When you read the marking on the back of an existing belt, confirm the SPZ section and the length before you request a quote. The same size is also listed under Stark SPZ 1112 and Optibelt SPZ 1112, which can help when you are comparing what is on the shelf against what the drive needs.
For a quote, send the part number Mitsuboshi SPZ 1112, the quantity, and the profile and length you measured if you are replacing an unmarked belt. If a drive runs more than one belt, note the full set so the replacement can be matched as a set.
Dimensions
- Section
- SPZ
Frequently asked questions
- What do the SPZ profile and the 1112 length tell me?
- SPZ identifies the narrow wedge section, and 1112 is the length reference. Order by both: the section must match the pulley groove, and the length must match the drive.
- Can you help if I only have the old belt?
- Yes. Send the part number if it is still readable, or the profile and length you measured from the old belt, and the team can confirm the right belt or suggest an equivalent.
- Is this belt listed under other brands in the same size?
- Yes. The same size is also listed under Stark SPZ 1112 and Optibelt SPZ 1112.