V-belt Mitsuboshi SPB 7500
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPB 7500 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 7500 and any equivalents.
The Mitsuboshi SPB 7500 is a narrow wedge V-belt with an SPB profile. It measures 16.3 mm across the top, 13 mm in height, and has a 40° angle. If you are replacing a belt on a driven machine, start by matching these dimensions and the belt marking to what you remove.
To confirm the SPB 7500 is the correct replacement, read the marking on the back of the old belt. Compare the profile letters and the length number with the SPB and 7500 shown here. Then check the cross-section: the old belt should measure 16.3 mm at the top and 13 mm high, with a 40° angle. A belt that is narrower, wider, or shorter will not sit correctly in the pulley groove.
Inspect the drive before ordering. Look for worn pulley grooves, misalignment, or damaged sheaves that could shorten belt life. If the drive uses multiple belts, replace them as a set so the load stays even. The same size is also listed under Optibelt SPB 7500, which gives you a second brand to reference when checking the old marking.
For a quote, send the part number SPB 7500, the quantity, and the equipment or drive it fits. If the old belt marking is unreadable, share the pulley dimensions and the center distance so we can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPB
Frequently asked questions
- How do I confirm the SPB 7500 matches my old belt?
- Check the marking on the back of the old belt for the SPB profile and the 7500 length number. Then measure the cross-section: it should be 16.3 mm at the top, 13 mm high, with a 40° angle. If those match, the SPB 7500 is the correct size.
- Can I replace just one belt in a multi-belt drive?
- Replace the full set at the same time. Mixing a new belt with worn belts can cause uneven tension and load, which may lead to premature failure of the new belt.
- What information should I send with my quote request?
- Send the part number SPB 7500, the quantity you need, and the equipment or drive it fits. If the old belt marking is not readable, include the pulley dimensions and center distance so we can help confirm the right belt.