V-belt Mitsuboshi SPAX 2240
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPAX 2240 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPAX 2240 and any equivalents.
This Mitsuboshi SPAX 2240 is a cogged narrow V-belt in the SPAX profile. Cogged narrow V-belts are used on industrial drives where a compact cross-section and good flexibility around small pulleys are required. To confirm fit, check that the existing belt is marked SPAX 2240 and that the drive uses an SPAX profile pulley groove.
The SPAX profile identifies the belt cross-section, so it must match the pulley groove. The 2240 in the part number gives the length in millimeters. Before ordering, read the marking on the back of the old belt and compare it with this part number. If the marking is worn, measure the outside length of the old belt and note the profile from the pulley groove.
Cogged narrow V-belts are common on fans, pumps, compressors and other industrial equipment driven by electric motors. The cogged construction is intended for drives with smaller pulleys, where a standard wrapped belt may not flex as easily. When replacing belts on a multi-belt drive, replace all belts in the set at the same time so the load is shared evenly.
Dimensions
- Section
- SPAX
Frequently asked questions
- How do I confirm that the SPAX 2240 is the correct belt for my drive?
- Check the marking on the back of the old belt. It should read SPAX 2240. Also confirm that the pulley groove matches the SPAX profile. If the marking is not readable, measure the outside length of the old belt and identify the profile from the pulley.
- Where is this type of belt used?
- Cogged narrow V-belts are used on industrial drives such as fans, pumps and compressors. They are often selected when the drive has small diameter pulleys that require a flexible belt.
- What information should I send to request a quote?
- Send the part number SPAX 2240 and the quantity you need. If you are unsure about the profile or length, include a photo of the belt marking and the pulley groove, and our team can help confirm the right belt.