V-belt Mitsuboshi SPAX 1400

MITSUBOSHI SPAX 1400 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPAX 1400 and any equivalents.

The marking on the back of a worn belt is the fastest way to identify what the drive needs. This page covers the Mitsuboshi SPAX 1400, a cogged narrow V-belt in the SPAX profile. Find that marking, note the profile and part number, and you have what you need to request a quote.

Cogged narrow V-belts are used where a standard V-belt would run too hot or slip under load. The molded cogs improve flexibility around smaller pulleys and help the belt run cooler. The SPAX 1400 is built to the SPAX profile, so the cross-section and length must match what the drive was designed for.

Before you order, clean the old belt and read the stamping along its back. Look for the profile and the number that follows it. If the printing has worn off, check the drive for a spec plate or measure the pulley groove and belt length. Send the part number and a photo of the marking if it is faint, and the team can confirm the belt or suggest an equivalent.

When a drive uses multiple belts, replace them as a set so the load stays even across the grooves. Inspect the pulleys for wear, oil or debris while the belts are off. We carry the Mitsuboshi SPAX 1400 and can help you match it to your application.