V-belt Mitsuboshi SPA 2240
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPA 2240 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 2240 and any equivalents.
This Mitsuboshi SPA 2240 is a narrow wedge V-belt with an SPA profile, a 12.7 mm top width, a 10 mm height and a 40° angle. Before you fit it, inspect the drive and sheaves, because worn grooves or misalignment will shorten the life of any new belt. We carry this belt and quote it by part number.
Start with the sheaves. Check the groove profile for wear, look for cracks or burrs on the flanges, and confirm the sheaves are aligned and secure. A narrow wedge V-belt like this SPA 2240 runs in the groove rather than on the bottom, so a worn groove changes how the belt sits and how it transmits load.
Then check the rest of the drive: keys, bushings, bearings and tensioning hardware. Clean the grooves and remove any debris or oil before fitting the belt. If the drive uses more than one belt, replace them as a set so the load stays shared evenly across the grooves.
The same size is also listed under Stark SPA 2240 and Optibelt SPA 2240. To request a quote, send the part number SPA 2240, the quantity you need and any details from the back of the old belt by WhatsApp or email.
Dimensions
- Section
- SPA
Frequently asked questions
- What are the dimensions of this SPA 2240 belt?
- It has an SPA profile, a 12.7 mm top width, a 10 mm height and a 40° angle.
- Is the same size listed under other brands?
- Yes, the same size is also listed under Stark SPA 2240 and Optibelt SPA 2240.
- What should I send to request a quote?
- Send the part number SPA 2240, the quantity you need and any details from the back of the old belt by WhatsApp or email.