V-belt Mitsuboshi SPA 1232
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPA 1232 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 1232 and any equivalents.
This Mitsuboshi SPA 1232 is a narrow wedge V-belt with an SPA profile. It is used in industrial drives where a compact, high-capacity belt is required, such as on pumps, fans, compressors and machine tools. Confirm fit by checking the belt marking and the drive pulley groove profile before ordering.
The SPA profile has a 12.7 mm top width, a 10 mm height and a 40° angle. These dimensions match SPA pulleys, so the belt seats correctly in the groove and transmits load without bottoming out. If the drive uses a different profile, the belt will not fit properly even if the length appears close.
To confirm the right belt, read the marking on the back of the old belt. The SPA 1232 marking identifies both the profile and the length. Also check the pulley grooves for wear or damage, and replace belts in sets when the drive uses multiple belts, so all belts share the load evenly.
The same size is also listed under Optibelt SPA 1232. Send the part number and the belt marking by WhatsApp or email, and the team will confirm the profile and length or suggest an equivalent.
Dimensions
- Section
- SPA
Frequently asked questions
- How do I confirm that the SPA 1232 is the correct belt for my drive?
- Check the marking on the back of the old belt and the pulley groove profile. The SPA profile has a 12.7 mm top width, 10 mm height and 40° angle. If the old belt is marked SPA 1232, this belt matches that profile and length.
- Can I replace just one belt in a multi-belt drive?
- For drives with multiple belts, replace all belts in the set at the same time. This keeps the load shared evenly and avoids premature failure of the new belt.
- What information should I send to request a quote?
- Send the part number SPA 1232 and, if possible, a photo of the belt marking and the pulley grooves. The team will confirm the profile and length or suggest an equivalent.