V-belt Mitsuboshi C 87
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI C 87 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 87 and any equivalents.
The Mitsuboshi C 87 is a classical V-belt with a C profile, 22 mm top width, 14 mm height, and a 40-degree angle. To match it to the belt you are replacing, read the marking on the back of the old belt and confirm the same profile and part number. This belt is also listed under the same size as Stark C 87.
When the existing belt is worn or the marking is faint, measure the top width and height with a caliper and compare them with the C profile dimensions: 22 mm across the top and 14 mm thick. The 40-degree angle is the standard included angle for this profile. If the old belt still carries a part number, the C 87 marking is the most direct match.
Because belts can stretch or take a set over time, a used belt may not measure exactly like a new one. Use the printed part number as the primary reference, and treat dimensions as a secondary check. If the drive uses multiple belts, replace them as a set so the load is shared evenly across all grooves. Inspect the sheaves for wear, rust, or debris that can shorten belt life.
We carry the Mitsuboshi C 87 and can help confirm it is the right belt for your drive. Send the part number, the profile marking, or a photo of the old belt by WhatsApp or email to request a quote.
Dimensions
- Section
- C
Frequently asked questions
- How do I confirm the Mitsuboshi C 87 is the correct replacement?
- Check the marking on the back of the belt you are replacing. If it reads C 87, it matches this belt. You can also measure the top width and height: the C profile is 22 mm wide and 14 mm high, with a 40-degree angle.
- Can I use this belt if the old one is too worn to read?
- Yes. Measure the top width and height of the old belt with a caliper and compare them with the C profile dimensions. If they match, the C 87 is the correct profile and part number. When in doubt, send a photo or the measurements to our team for confirmation.
- Should I replace all belts on a multi-belt drive at the same time?
- Yes. On drives that use more than one belt, replace the full set so all belts share the load evenly. Mixing a new belt with worn belts can cause the new belt to carry more than its share and wear faster.