V-belt Mitsuboshi C 240
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI C 240 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 240 and any equivalents.
The Mitsuboshi C 240 is a classical V-belt with a C profile. It measures 22 mm across the top, 14 mm high, and has a 40° angle. If you are replacing a worn belt, match these dimensions and the part number to the belt you are removing.
The most reliable way to identify the correct replacement is to read the marking on the back of the old belt. Confirm that the profile is C and the part number is C 240, then check the top width, height, and angle against the data here. A belt that matches on all counts is the right starting point for the drive.
The same size is also listed under Stark C 240 and Optibelt C 240. If your drive uses more than one belt, inspect every belt in the set and replace them together so the load stays even across the grooves. Check sheaves for wear, alignment, and debris at the same time.
To request a quote, send the part number C 240, the quantity you need, and the marking from your old belt. If you are unsure between this belt and another, include the drive details and our team will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
Frequently asked questions
- How do I confirm the Mitsuboshi C 240 matches my old belt?
- Read the marking on the back of the old belt. It should show a C profile and the part number C 240. Then compare the top width of 22 mm, the height of 14 mm, and the 40° angle with the data on this page.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Stark C 240 and Optibelt C 240.
- What should I send to get a quote?
- Send the part number C 240 and the quantity you need. If you are replacing a belt and want us to confirm the match, include the marking from the old belt and the drive details.