V-belt Mitsuboshi C 183
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI C 183 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 183 and any equivalents.
The Mitsuboshi C 183 is a classical V-belt with a C profile. Its 22 mm top width, 14 mm height and 40° angle identify a standard cross-section, so the marking on the back of the belt is the fastest way to match a replacement to the drive in front of you.
Profile and length are the two dimensions that decide fit. This belt uses the C cross-section, 22 mm across the top and 14 mm high, with a 40° angle. If the old belt is worn or the marking is unreadable, measure the top width and height and compare them with these figures before ordering.
The same size is also listed under Stark C 183, Gates C 183 and Optibelt C 183. That gives you a straightforward way to cross-check a belt already on the shelf or in a maintenance log. Send the part number, the drive it runs on and the quantity you need, and the team can confirm the C 183 or point you to the equivalent.
Dimensions
- Section
- C
Frequently asked questions
- What do the profile and dimensions tell me about this belt?
- The C profile is a classical V-belt cross-section. This belt measures 22 mm across the top, 14 mm high and has a 40° angle. Those dimensions, together with the part number, are what you match to the drive.
- How do I confirm the C 183 is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. If it is worn away, measure the top width and height of the old belt and compare them with the 22 mm and 14 mm figures for this belt.
- What should I send to get a quote?
- Send the part number C 183, the quantity, and any details from the drive or the old belt. If you are unsure of the cross-section, include the measured top width and height so the team can confirm the profile.