V-belt Mitsuboshi B 20
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI B 20 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 20 and any equivalents.
This Mitsuboshi B 20 is a classical V-belt with a B profile. The 17 mm top width, 11 mm height and 40° angle identify the cross-section, while the code B 20 gives you the belt's length designation. Use these values to match an existing belt or to confirm the correct size for your drive.
When you read a classical V-belt marking, the profile letter and the number after it are the two key details. Here, the B profile sets the cross-section: 17 mm across the top, 11 mm high and a 40° angle. The 20 in the part number is the length designation. If the old belt on your drive is marked B 20, this Mitsuboshi belt matches that profile and length.
For a quote, send the part number B 20 and the quantity you need. If you are replacing a belt from another brand, check the top width and height against your pulley groove before ordering. The 17 mm by 11 mm cross-section and 40° angle are the dimensions to compare. If the marking is worn or unreadable, measure the top width and the outside length of the old belt and send those values with your request.
Dimensions
- Section
- B
Frequently asked questions
- What do the profile and the number in B 20 tell me?
- The B is the profile: a classical V-belt cross-section with a 17 mm top width, 11 mm height and 40° angle. The 20 is the length designation for this belt.
- Can I use this belt to replace a worn one on my drive?
- If the old belt is marked B 20 and the pulley groove matches the 17 mm by 11 mm cross-section, this Mitsuboshi belt is the same profile and length. Compare the marking on the back of the old belt before ordering.
- What should I send to get a quote?
- Send the part number B 20 and the quantity. If you are unsure of the size, include the top width and outside length you measured from the old belt so we can help confirm the right belt.