V-belt Mitsuboshi B 117
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →GATES and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI B 117 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 117 and any equivalents.
The Mitsuboshi B 117 is a classical V-belt in the B profile. It measures 17 mm across the top, 11 mm in height, and has a 40° angle. This page gives you the profile and dimensions to match against your drive.
The B profile is a standard classical V-belt cross-section. The 17 mm top width and 11 mm height fit the corresponding B-section pulley groove. The 40° angle is the included angle of the belt cross-section. Use these three dimensions together with the part number to confirm the belt matches the drive you are servicing.
The same size is also listed under Stark B 117 and Gates B 117. If your drive calls for that size, this Mitsuboshi belt is a direct match by profile and dimensions. For a quote, send the part number B 117, the quantity, and the drive or equipment reference. Our team can confirm the belt or suggest an equivalent.
When you replace a classical V-belt, inspect the pulley grooves for wear and check the sheave alignment. A worn groove can let a new belt sit too low and slip. If the drive uses multiple belts, replace them as a set so the load stays even across the belts.
Dimensions
- Section
- B
Frequently asked questions
- How do I confirm the B 117 fits my drive?
- Check the belt marking on the old belt and measure the cross-section. The B 117 has a 17 mm top width, 11 mm height, and a 40° angle. If your drive uses a B-section pulley groove, this belt matches by profile and dimensions.
- What should I send to request a quote?
- Send the part number B 117, the quantity you need, and the drive or equipment it goes on. If you have the old belt, include the marking on the back. We will confirm the belt or suggest an equivalent.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Stark B 117 and Gates B 117.