V-belt Mitsuboshi A 80
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and MITSUBOSHI: matching part numbers →GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI A 80 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 80 and any equivalents.
The Mitsuboshi A 80 is a classical V-belt with an A profile. It measures 13 mm across the top, 8 mm high and has a 40° angle. If you are replacing a belt on an existing drive, this is the reference to match against the belt you are removing.
The most reliable way to match this belt is to read the marking on the back of the old belt. Look for the A profile and the 80 length designation, then compare it with the profile, top width, height and angle listed here. A belt that has stretched or worn may no longer measure true, so the marking is often the better guide than a caliper reading alone.
The same size is also listed under Stark A 80 and Optibelt A 80, which can help when you are cross-checking a belt that has been replaced before. Confirm the drive uses an A profile and that the belt sits correctly in the pulley groove before ordering.
Send the part number, the old belt marking and the drive details by WhatsApp or email. We carry Mitsuboshi belts and can confirm the A 80 or suggest an equivalent.
Dimensions
- Section
- A
Frequently asked questions
- How do I confirm the A 80 is the right belt?
- Check the marking on the back of the belt you are replacing for the A profile and the 80 length designation. Compare that with the 13 mm top width, 8 mm height and 40° angle shown for this belt.
- Can I match it if the old belt marking is worn off?
- Measure the top width, height and angle of the old belt and compare them with the figures here. If the belt has stretched or worn, the original marking is still the better reference when it can be read.
- What should I send for a quote?
- Send the part number A 80, the brand and profile from the old belt, and the drive details. If you have a photo of the old belt marking, include it so we can confirm the match.