V-belt Mitsuboshi A 55
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and MITSUBOSHI: matching part numbers →GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI A 55 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 55 and any equivalents.
The Mitsuboshi A 55 is a classical V-belt with an A profile. Its 13 mm top width, 8 mm height and 40° angle identify the cross-section, while the 55 marking gives the length. Use these dimensions to confirm the belt before you request a quote.
When you have the old belt in hand, read the marking on the back. A 55 tells you the profile and the length. The profile sets the cross-section: 13 mm across the top, 8 mm high, with a 40° angle. The length marking identifies the belt size. If the marking is worn or missing, measure the top width and height and compare them with the profile dimensions above.
The same size is also listed under Stark A 55 and Optibelt A 55. If you are replacing a belt on a drive that runs more than one belt, order the full set so all belts share the same profile and length. Send the part number A 55, the quantity, and the drive or equipment reference by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
Frequently asked questions
- What do the A and 55 mean on this Mitsuboshi belt?
- A is the profile and 55 is the length marking. The profile gives a 13 mm top width, 8 mm height and 40° angle. Use the marking on the back of your old belt to match both.
- Can you help if I only have the old belt and no part number?
- Yes. Send the marking from the back of the belt, or measure the top width and height. The team can confirm the A 55 or suggest an equivalent.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Stark A 55 and Optibelt A 55.