V-belt Mitsuboshi A 150
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI A 150 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 150 and any equivalents.
This Mitsuboshi A 150 is a classical V-belt with an A profile. To match it to the belt being replaced, compare the profile and the part number on the old belt. The same size is also listed under Stark A 150.
The A profile is 13 mm across the top, 8 mm high and cut at 40°. These dimensions identify the belt family, so the replacement must share the same profile before anything else is checked. If the old belt is worn or the marking is unreadable, measure the top width and height with a caliper and note the part number.
The A 150 marking on the back of the belt is the reference to match. Read it from the belt that came off the drive, then request a quote for the Mitsuboshi A 150 or the same size under Stark A 150. Send the part number and, if known, the drive it serves so the team can confirm the right belt or suggest an equivalent.
Replacing a classical V-belt is also a chance to inspect the drive. Check the sheave grooves for wear and the pulleys for alignment. On drives with more than one belt, replace the full set so the belts share the load evenly and run at the same tension.
Dimensions
- Section
- A
Frequently asked questions
- How do I match the Mitsuboshi A 150 to the belt I am replacing?
- Read the marking on the back of the old belt. If it shows A 150, this Mitsuboshi belt is the same profile and part number. If the marking is gone, measure the top width and height and compare them with the A profile dimensions.
- What are the dimensions of the A profile?
- The A profile has a 13 mm top width, an 8 mm height and a 40° angle.
- What should I send to request a quote?
- Send the part number A 150 and the brand you prefer, Mitsuboshi or Stark. If you can, include the drive or equipment it fits so the team can confirm the right belt or suggest an equivalent.