Timing belt Mitsuboshi 776-H8M-10

MITSUBOSHI 776-H8M-10 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 776-H8M-10 and any equivalents.

This Mitsuboshi 776-H8M-10 is a timing belt with an HTD 8M profile and an 8 mm pitch. It is used in synchronous drives where tooth engagement maintains timing between the pulleys. Confirm the belt marking and drive dimensions before ordering.

Timing belts like this one are common on industrial drives that require synchronized motion, such as cam drives, positioning axes, and other equipment where slip must not occur. The HTD 8M profile and 8 mm pitch determine how the belt seats in the pulley grooves, so both must match the drive components exactly.

To confirm fit, read the marking on the back of the old belt and compare it with 776-H8M-10. Check that the pulley grooves are for an HTD 8M profile and that the drive was designed for an 8 mm pitch. If the marking is worn or unreadable, measure the pulley groove profile and pitch, and count the teeth on both pulleys. Send the belt marking, the pulley tooth counts, and the center distance to your MR contact by WhatsApp or email for a prompt quote.

Replacing the belt is also the time to inspect the pulleys for worn grooves, debris, or damage, and to check the drive alignment. If the old belt shows unusual wear, address the cause before installing the new belt.