V-belt Mitsuboshi 5VX 1000
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI 5VX 1000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5VX 1000 and any equivalents.
The Mitsuboshi 5VX 1000 is a cogged narrow V-belt with a 5VX profile and a 1000 mm length. This page covers what those two figures tell you before you match the belt to a drive.
The 5VX profile identifies a narrow V-belt cross-section. The 1000 mm length is the belt's datum length. Together they are the two values you need to confirm the belt will sit correctly in the pulley grooves and run at the intended center distance. The cogged construction is part of the belt type and is common where a standard wrapped narrow V-belt is not the preferred choice.
If you are replacing a belt on an existing drive, read the marking on the back of the old belt first. A 5VX 1000 marking points to this size. If the marking is worn or missing, measure the old belt and check the pulley profile before ordering. The same size is also listed under Stark 5VX 1000 and Dayco 5VX 1000, so those markings may appear on a belt already in service.
For a quote, send the part number 5VX 1000, the brand if known, and the quantity. If you are unsure whether this is the correct belt for the drive, include the pulley diameters, the center distance, and a photo of the old belt marking. The team can confirm the profile and length or suggest an equivalent.
Dimensions
- Section
- 5VX
Frequently asked questions
- What do the 5VX profile and 1000 mm length mean?
- The 5VX profile is the cross-section of this narrow V-belt. The 1000 mm value is the belt length. Both are needed to match the belt to the pulley grooves and the drive layout.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt. If it reads 5VX 1000, this is the same size. If the marking is not readable, measure the old belt and note the pulley profile before ordering.
- What should I send to request a quote?
- Send the part number 5VX 1000, the quantity, and the brand if known. If you need help confirming the belt, include the pulley diameters, center distance, and a photo of the old belt marking.